Your Single Source For Modular Safety Railings
Federal Supply Schedule
e-buy link
Contract No.
GS-07F-0224N
Click Here If You Want Custom Railings Instead of Kwik Kit
|
Straight Kit  |
Used when two 6′ sections of straight railing are required. The Straight Kit can be extended using 6′ Extension Kits (see below). The 6′ top and mid rails can be shortened by cutting to your desired length. |
Corner Kit  |
Used where a 90° corner is required. The Corner Kit can be lengthened by using 6′ Extension Kits (see below). The 6′ top and mid rails can be shortened by cutting to your desired length. |
Extension Kit  |
Used to extend either the Straight Kit or Corner Kit in 6′ increments. The 6′ top and mid rails can be shortened by cutting to your desired length. |
Model # |
Description |
Straight Kit |
|
Kwik SS |
Straight Kit – Steel , two 6' sections |
Kwik AS |
Straight Kit – Aluminum , two 6' sections |
Corner Kit |
|
Kwik SC |
Corner Kit – Steel , two 6' sections @ 90° |
Kwik AC |
Corner Kit – Aluminum , two 6' sections @ 90° |
Extension Kit |
|
Kwik SE |
Extension Kit – Steel, one 6' section |
Kwik AE |
Extension Kit – Aluminum , one 6' section |
About Kwik Kit
Kwik Kit Safety Railing Kits Offer Pre-packaged Convenience
Everything you need for the Kwik Kit assembly is included in one box. Railing Uprights are pre-assembled to save you even more time and eliminate parts guesswork.
A Sturdy Railing Package
Kwik Kit safety railing kits allow you to create a sturdy railing system with no welding and the added advantage of safety yellow rails. These railing kits are quick to assemble using a hex key to tighten the large, easy to use set screws. Kwik Kit safety railing kits are pre-packaged with 6-foot post spacing for straight sections, corner sections or extension sections. By using a combination of Straight, Corner, or Extension Kits, almost any basic railing requirement can be fulfilled. The rails may be cut where shorter sections are required. The kits may be secured using bolts or chemical anchors attached to the base fittings.
Pre-assembled Uprights Save Even More Time
Assembly is intuitive. Just place your horizontal rails into the pre-positioned upright fittings and tighten the set screws. A convenient hex key set is provided with your kit to assist you during the installation process. You can then determine your railing placement and choose your own method of anchoring the railing assembly. Once the railing assembly is anchored, make any final adjustments needed. Upon final inspection of the railing, it is recommended that all of the fitting set screws be tightened to a torque 29 lbs/ft.
Kwik Kit Safety Railing Kits are supplied with all the components to install either a 12 foot straight run or a 6 foot by 6 foot 90 degree corner safety rail system. Additional footage can be achieved by ordering 6 foot extension kits.