Previous Fitting, Return to Main Catalog Page, Next Fitting

Type 145 - Crossover Coupling
 

Nominal Pipe Size

inches

lbs

Type

A

B

C

D

E

F

G
145-7 1 1/4"

2.16 4.02 3.27 0.91 1.83

 

This fitting is designed to give a 90 degree offset crossover. As there are two socket set screws in the sleeve, this Kee Klamp fitting can be used where a join is required in the horizontal pipe. For economy, it is possible to use a Type 45 in place of the 145, using the 145 only where a join in the pipe occurs. When calculating the cutting lengths for pipe, dimension 'G' should be added to give the pipe length for the upright.

Note: To obtain the true height of the upright the allowance for the base fittings must be included.


Return to the Safety Rail Source Home Page